4–10 Maintenance and Service Guide
Removal and replacement procedures
Mass storage device
✎
The mass storage device spare part kit includes a left and right bracket, Mylar sleeve, connector, and 4 isolators.
Before removing the mass storage devices, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
Description Spare part number
Hard drive:
■ 500-GB, 7200-rpm 577607-001
■ 500-GB, 5400-rpm 501911-001
■ 320-GB, 7200-rpm 507553-001
■ 320-GB, 5400-rpm 503485-001
■ 250-GB, 7200-rpm 507552-001
■ 250-GB, 5400-rpm 503484-001
Solid-state drive:
■ 256-GB 577609-001
■ 128-GB 577608-001
Mass Storage Device Hardware Kit (includes left and right brackets, Mylar sleeve, connector,
and 4 isolators)
483862-001
To Next Page
Loading...
Need help?
General