HP Pro 2000 User Manual

1 x RJ-45 10/100/1000 port
1 x serial port
1 x DVI-D video port
1 x DB 15-pin analog VGA port
3 x audio ports
On Board I/O Interfaces 1 x ATX power connector
1 x +12V power connector
1 x Floppy connector
1 x header (1 – 1x3) to support hood sensor
1x COM2 header
1x Parallel header
1 x Front panel connector, Switch, LED (ON/Flash/OFF)
2 x Fan headers for CPU, chassis, with voltage/fan speed control
1 x header (1 – 2x5, ) to support 2 USB 2.0 ports at front side
1 x header (1 – 2x5) to support USB Card Media Reader
1 x header (1 – 1x2) to support one touch reset
1 x header (1 –- 1x2) to support one touch recovery
1 x header to support 2 front (Headphone/Mic) audio ports
Board Size Micro-ATX, PCB Size: 9.6 x 9.6 in (24.38 x 24.38 cm)
4-layer PCB with green color
Additional Features Bootable without keyboard, mouse or monitor
Keyboard/mouse/USB wake up
Support S3, S4 and S5
ACPI status
Hardware monitor capability
CPU fan speed control
One button reset/recovery *
*Reset function will be set for China/Hong Kong/Korea; Recovery function will
be set for the other regions.
Network Interface Realtek 8111DL GbE Ethernet Controller
Intel Gigabit CT Desktop NIC
Modem LSI PCIe x1 56K International SoftModem
QuickSpecs
HP Pro 2000 Business PC
System Details
DA - 13494 Worldwide — Version 5 — November 29, 2010 Page 10

HP Pro 2000 Specifications

General

Brand	HP
Model	Pro 2000
Category	Desktop
Language	English