EasyManuals Logo
Home>HP>Desktop>Pro 2000

HP Pro 2000 User Manual

HP Pro 2000
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
System Environmental
Specs
Values are subject to change without notification and are for reference only.
Performance of system, options, and ancillary equipment will vary depending on the system
configuration.
Levels presented do not account for non-HP/Compaq installed hardware.
Ambient Air Temperature
Operating
Operating 41° to 95°F (5 to 35°C) (Test 0 to 104°F
(40°C))
Storage
Storage: 90% RH @ 60°C for 12 hours (Non-
condensing)
Humidity
Operating
10% to 90% relative humidity (Rh), 35°C non-
condensing
Storage
90% relative humidity (Rh), 60°C for
12 hours, non-condensing
Altitude
Operating
0 to 10,000 feet (0 to 3048 meters) - This value
may be limited by the type and number of options
installed.
Non-Operating
0 to 30,000 feet (0 to 9,144 meters)
Shock
Listed are the levels of shock the product can withstand with No damage
being incurred. The values represent peak input acceleration during an 2~3 ms
half-sine shock pulse, 11 ms trapezoidal shock pulse.
Non-Operating
35G's (Half-sine Shock)
30G's (Trapezoidal Shock)
Vibration
Listed are the levels of vibration the product can withstand with No damage
being incurred. The values represent a flat random vibration input
acceleration profile across the given frequency range.
Operating
Random vibration at 5Hz@0.00025G2/Hz,
10Hz@0.01G2/Hz, 100Hz@0.01G2/Hz,
300Hz@0.00001G2/Hz
5Hz to 300Hz, (0.25G's nominal).
Non-Operating
~2.09Grms (5-500Hz), Non-Operational
Acoustic Noise
Listed are the declared A-WEIGHTED SOUND POWER LEVELS (LWAd) and
declared average desktop seated operator position A-WEIGHTED SOUND
PRESSURE LEVELS (LpAm) when the product is operating in a 73.4°F (23°C)
ambient environment. Noise emissions were measured in accordance with ISO
7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
IDLE
(Fixed disk drive
spinning)
LWAd = 4.3 Bels,
Desktop Average LpAm = 32 dBA
FIXED DISK
(Random
write)
LWAd = 4.4 Bels,
Desktop Average LpAm = 33 dBA
DVD-ROM
(Sequential
Reads)
LWAd = 5.5 Bels,
Deskside Average LpAm = 44 dBA
QuickSpecs
HP Pro 2000 Business PC
System Details
DA - 13494 Worldwide — Version 5 — November 29, 2010
Page 12

Other manuals for HP Pro 2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Pro 2000 and is the answer not in the manual?

HP Pro 2000 Specifications

General IconGeneral
BrandHP
ModelPro 2000
CategoryDesktop
LanguageEnglish

Related product manuals