HP ProCurve Series User Manual

4-4
Replacing Components
Replacing the Battery
Replacing Components
4. Insert a new battery with the lettering and the plus “+” sign facing up.
Be sure to replace with the same type of battery.
5. Reinstall the top of the switch. Ensure you correctly align the top cover
pin.
Figure 4-4. Alignment of the top cover pin with the alignment hole.
6. Reinstall and tighten all the screws securing the top.
7. Reconnect the power cable to the switch.
ATTENTION ll y a danger d'explosion s'il y a remplacement incorrect de la batterie.
Remplacer uniquement avec une batterie du même type ou d'un type
équivalent recommandé par le constructeur.
Mettre au rebut les batteries usagées conformément aux instructions du
fabricant.
Top Cover Pin
Alignment
Hole

HP ProCurve Series Specifications

General

Brand	HP
Model	ProCurve Series
Category	Switch
Language	English