HP SN3000B Fibre Channel Switch
c04111465 – DA – 14277 Worldwide — Version 12 — June 10, 2014
Switch mode (default): 12- and 24-port configurations (12-port increment
through Ports on Demand [PoD] license); universal (E, F, M, EX, D) ports
Full fabric architecture:
http://h18006.www1.hp.com/products/storageworks/san/
documentation.html
Refer to SAN Design Guide for current configuration information:
http://h18006.www1.hp.com/products/storageworks/san/
documentation.html
4/64 SAN Switch
4/32B SAN Switch
4/8 SAN Switch
4/16 SAN Switch
8/8 SAN Switch
8/24 SAN Switch
8/40 SAN Switch
8/80 SAN Switch
Encryption SAN Switch
2408 FCoE Converged Network Switch
1606 Extension SAN Switch
DC04 SAN Director
DC SAN Backbone Director
SN8000B 8-Slot SAN Backbone Director
SN8000B 4-Slot SAN Director
SN6500B Fibre channel Switch
SN3000B Fibre channel Switch
SN6000B 16Gb FC Switch
Brocade 4Gb SAN Switch for HP c-Class BladeSystem
Brocade 8Gb SAN Switch for HP BladeSystem c-Class
HP 400 MP-Router
Auto-sensing of 4, 8, and 16 Gbps port speeds.
Frame-based trunking with up to eight 16 Gbps ports per ISL trunk; up to
128 Gbps per ISL trunk. Exchange-based load balancing across ISLs with
DPS included in Fabric OS. There is no limit to how many trunk groups can
be configured in the switch.
Latency for locally switched ports is 700 ns; encryption/compression is 5.5
sec per node; Forward Error Correction (FEC) adds 400 ns between E_Ports
(enabled by default).
Class 2, Class 3, Class F (inter-switch frames)
D_Port (Diagnostic Port), E_Port, EX_Port, F_Port, M_Port (Mirror Port);
self-discovery based on switch type (U_Port); optional port type control
Access Gateway mode: F_Port and NPIV-enabled N_Port
Fabric switches supporting unicast
Hot-pluggable, B-Series Branded Small Form Factor Pluggable (SFP), LC
connector; Short-Wave Laser (SWL), Long-Wave Laser (LWL); distance
depends on fiber-optic cable and port speed. Supports SFP+ (16/8 Gbit/sec)
optical transceivers.