Hardware Reference Guide www.hp.com 2-1
2
Hardware upgrades
General hardware installation sequence
To ensure the proper installation of any thin client hardware option:
1. Back up any data, if necessary.
2. If the thin client is powered on:
a. Shut the unit down.
b. Turn the unit and any other attached devices off.
c. Disconnect the power cord from the wall outlet.
d. Disconnect any external devices or cables.
Å
WARNING: To reduce the risk of personal injury from electrical shock
and/or hot surfaces, be sure to disconnect the power cord from the wall
outlet and allow the internal system components to cool before touching.
Å
WARNING: To reduce the risk of electrical shock, fire, or damage to the
equipment, do not plug telecommunications or telephone connectors into
the network interface controller (NIC) receptacles.
Ä
CAUTION: Static electricity can damage the electronic components of
the thin client or optional equipment. Before beginning these procedures,
ensure that you are discharged of static electricity by briefly touching a
grounded metal object. See Appendix D, “Electrostatic discharge” for
more information.
To Next Page
Loading...
Need help?
General