HP T5720 - Compaq Thin Client Hardware Reference Guide

Hardware Reference Guide www.hp.com E-1
E
Thin client operation
Routine thin client care
Use the following information to properly care for your thin client:
■ Operate the thin client on a sturdy, level surface. Leave a 1-inch
(2.5-cm) clearance around the air vents to permit the required
airflow.
■ Never operate the thin client with the outside panel removed.
■ Never restrict the airflow into the thin client by blocking the vents
or air intake.
■ Keep the thin client away from excessive moisture, direct
sunlight, and extreme heat and cold. For information about the
recommended temperature and humidity ranges for the thin
client, see Appendix A, “Specifications”.
■ Keep liquids away from the thin client and keyboard.
■ Turn off the thin client before you do either of the following:
❏ Wipe the exterior of the thin client with a soft, damp cloth as
needed. Using cleaning products may discolor or damage the
finish.
❏ Occasionally clean the air vents of the thin client. Lint and
other foreign matter can block the vents and limit airflow.

HP T5720 - Compaq Thin Client Specifications

General

Brand	HP
Model	T5720 - Compaq Thin Client
Category	Server
Language	English