HP V241ib User Manual

12
Remove the VGA screws
6) Disassemble 5 screws from the board.
Remove the screws from the PCBA
7) Disassemble all the boards from housing and disconnect all the wires from the board.
Separate the PCBA from chassis
Power board
The power board part number is 790TK1400M00R01.
Before removing the power board, follow these steps:
▲ Prepare the monitor for disassembly. See Preparation for disassembly on page 10.
Remove the power board:
1) The HP V241ib power board connector position is as follows:

HP V241ib Specifications

General

Brand	HP
Model	V241ib
Category	Monitor
Language	English