3–8 User Guide
Setting Up the Monitor
Ä
CAUTION: This monitor supports the VESA industry standard
100mm mounting holes. To attach a third party mounting solution to
the monitor, four 4mm, 0.7 pitch, and 10mm long screws are
required (not provided with the monitor). Longer screws should not be
used because they may damage the monitor. It is important to verify
that the manufacturer’s mounting solution is compliant with the VESA
standard and is rated to support the weight of the monitor display
panel. For best performance, it is important to use the power and
video cable provided with the monitor.
2. Mount the monitor to a swing arm or other mounting fixture
by following the instructions included with the mounting
fixture to be used.
Locating the Rating Labels
The rating labels on the monitor provide the spare part number,
product number, and serial number. You may need these numbers
when contacting HP about your monitor model. The rating labels
are located on the left and right sides of the monitor pedestal.
To Next Page
Loading...
Need help?
General
