HP X24c User Manual



9

4 Removal and replacement procedures
Adherence to these procedures and precautions is essential for proper service.
Preparation for disassembly
Use this information to properly prepare to disassemble and reassemble the monitor.
1) Read the “Important safety information” and “Important service information and precautions”
sections in the “Getting started” chapter of this guide.
2) Clean the room for disassembly.
3) Identify the disassembly area.
4) Check the position that the monitors are to be placed along with the number of monitors. Prepare the
area for material flow according to the disassembly layout.
5) Be sure to have the following equipment and materials:
 Press fixture
 Working table
 Screwdriver
 Knife
 Gloves
 Cleaning cloth
 ESD protection
 Scraper bar in the following dimensions:
▲ Prepare the monitor for disassembly.
1) Rotate the screw from counterclockwise to remove base

HP X24c Specifications

General

Color	black
Screen Type	lcd
OS Compatibility	not applicable
Screen Size	23.6 inches
Panel Type	va
Aspect Ratio	16:9
Resolution	1920 x 1080
Refresh Rate	144hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	4 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	3000:1
Synchronization	freesync premium (amd adaptive sync)
HDR	no
Display Port Inputs	1
Width with Stand	21.1 inches
Net Weight without Stand	11.72 pounds