HP X24c User Manual

18

dark. as needed.
Check Video
Cable is
displayed on
screen.
Monitor video cable is disconnected. Connect the appropriate
video signal cable
between the computer and
monitor. Be sure that the
computer power is off
while you connect the
video cable.
Input Signal
Out of Range is
displayed on
screen.
Video resolution and/or refresh rate are set
higher than what the monitor supports.
Change the settings to a
supported setting.
The monitor is
off, but it did not
seem to enter
into Sleep
mode.
The monitor’s power saving control is disabled. Open the OSD menu and
select Power Control >
Auto-Sleep Mode and set
auto-sleep to On.
On-Screen
Menus are
Locked is
displayed.
The monitor’s OSD lock function is enabled. Press and hold the Menu
button on the front bezel to
10 seconds to disable the
OSD lockout function.
Power Button
is Locked is
Displayed
The monitor’s power button is locked. Press and hold the power
button for 10 seconds to
disable the power button
lock function.

HP X24c Specifications

General

Color	black
Screen Type	lcd
OS Compatibility	not applicable
Screen Size	23.6 inches
Panel Type	va
Aspect Ratio	16:9
Resolution	1920 x 1080
Refresh Rate	144hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	4 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	3000:1
Synchronization	freesync premium (amd adaptive sync)
HDR	no
Display Port Inputs	1
Width with Stand	21.1 inches
Net Weight without Stand	11.72 pounds