To Next Page

To Previous Page

4. Removal and replacement procedures

Adherence to these procedures and precautions is essential for proper service.

Preparation for disassembly

Use this information to properly prepare to disassemble and reassemble the monitor.

1) Read the “Important safety information” and “Important service information and precautions” sections in

the “Getting started” chapter of this guide.

2) Clean the room for disassembly.

3) Identify the disassembly area.

4) Check the position that the monitors are to be placed along with the number of monitors. Prepare the area for

material flow according to the disassembly layout.

5) Be sure to have the following equipment and materials:

 Press fixture

 Working table

 Screwdriver

 Knife

 Gloves

 Cleaning cloth

 ESD protection

 Scraper bar in the following dimensions:

Rear cover

Before removing the rear cover, follow these steps:

▲ Prepare the monitor for disassembly. See Preparation for disassembly on page 13.

Questions and Answers:

Need help?

Do you have a question about the HP X27q and is the answer not in the manual?

HP X27q Specifications

General

Color	black
Screen Type	lcd
Tiltable	yes
Touch Screen	no
Webcam	no
OS Compatibility	not applicable
Screen Size	27 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	2560 x 1440
Native Resolution	2560 x 1440
Refresh Rate	165hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	1 milliseconds
Brightness	400 candela per square meter
Contrast Ratio	1000:1
Synchronization	freesync premium (amd adaptive sync), not applicable
HDR	no
Built-In Speakers	no
HDMI Ports	1
Display Port Inputs	1
Voice Assistant	not applicable
Width with Stand	24.15 inches
Depth without Stand	8.33 inches
Height without Stand	20.17 inches
Net Weight without Stand	13.89 pounds