Connecting Monitor Cables
CAUTION: Before connecting cables to the monitor, ensure that the computer and monitor are
powered off.
NOTE: When using a DVI, VGA, or HDMI signal, you must connect your audio output to external
speakers.
The video source is determined by the video cable used. The monitor will automatically determine
which inputs have valid video signals. The inputs can be selected by pressing the source button on
the front panel.
Connecting the VGA Video Cable
Connect one end of the VGA video cable to the back of the monitor and the other end to the VGA
video connector on the computer. The VGA cable is included with select models.
Figure 3-3 Connecting the VGA Cable (cable provided with select models only)
8 Chapter 3 Setting Up the Monitor ENWW
To Next Page
Loading...
Need help?
General
