Installing the Cable Management Clip
Install the cable management clip over the input cable and power cord to gather them together
behind the monitor.
Figure 3-7 Installing the Cable management Clip
High-Bandwidth Digital Content Protection (HDCP) select
models
Your monitor supports HDCP and can receive high-definition content. High-definition content is
available in many sources, such as Blu-ray disc devices or HDTV air or cable broadcasts. If you do
not have an HDCP-enabled monitor, you will see a blank screen or a lower resolution picture when
playing high-definition protected content. Your computer graphics card and monitor must both support
HDCP to display protected content.
Turning on the Monitor
1. Press the power button on the computer to turn it on.
2. Press the power button on the front of the monitor to turn it on.
CAUTION: Burn-in image damage might occur on monitors that display the same static image on
screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you
should always activate a screen saver application or turn off the monitor when it is not in use for a
prolonged period of time. Image retention is a condition that might occur on all LCD screens. Monitors
with a "burned-in image" are not covered under HP warranty.
* A prolonged period of time is 12 consecutive hours of non-use.
12 Chapter 3 Setting Up the Monitor ENWW
To Next Page
Loading...
Need help?
General
