HP Z34c G3 User Manual

2
1. Getting started
Read this chapter to learn about safety information and where to find additional HP
resources.
Important safety information
Carefully read the cautions and notes within this document to minimize the risk of
personal injury to service personnel. The cautions and notes are not exhaustive. Proper
service methods are important to the safe, reliable operation of equipment. Improper
service methods can damage equipment.
The service procedures recommended and described in this service manual provide
effective methods of performing service operations. Service engineers should have prior
repair knowledge and experience as well as appropriate training for the product before
performing service procedures.
● Be sure your working environment is dry and clean and meets all government
safety requirements.
● Be sure that other persons are safe while you are servicing the product.
● Do not perform any action that can cause a hazard to the customer or make the
product unsafe.
● Use proper safety devices to ensure your personal safety.
● Always use approved tools and test equipment for servicing.
● Never assume the product’s power is disconnected from the main power supply.
Check that it is disconnected before opening the product’s cabinet.
● Modules containing electrical components are sensitive to electrostatic discharge
(ESD). Follow ESD safety procedures while handling these parts.
● Some products contain more than one battery. Do not disassemble or expose a
battery to high temperatures, such as throwing into fire, or the battery may
explode.
● Refer to government requirements for battery recycling or disposal.
This information provides general service information for the monitor. Adherence
to the procedures and precautions is essential for proper service.
IMPORTANT: Only trained service personnel who are familiar with this HP product
should perform service or maintenance for it. Before performing any service or
maintenance, personnel must read the important safety information.
IMPORTANT: You must disconnect the power cord from the power source before
opening the monitor to prevent component damage.

HP Z34c G3 Specifications

General

Panel type	VA
Pixel pitch	0.2325 x 0.2325 mm
Aspect ratio	21:9
Response time	8 ms
Display surface	Matt
Display diagonal	34 \
Display technology	LED
Vertical scan range	59 - 61 Hz
Maximum refresh rate	60 Hz
Horizontal scan range	88 - 90 kHz
Screen curvature rating	1900R
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Display brightness (typical)	350 cd/m²
Supported graphics resolutions	720 x 400, 1600 x 900, 2560 x 1440, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1366 x 768, 1440 x 900 (WXGA+), 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
HDCP	Yes
DisplayPort version	1.4
USB upstream port type	USB Type-B
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	4
Power consumption (max)	250 W
Power consumption (standby)	0.5 W
Power consumption (typical)	60 W
Package depth	226 mm
Package width	952 mm
Package height	504 mm
Package weight	16600 g
Tilt angle range	-5 - 10 °
Panel mounting interface	100 x 100 mm
Product color	Black, Silver
Market positioning	Business
Megapixel	5 MP
RMS rated power	5 W
Number of speakers	2
Sustainability certificates	EPEAT Silver, ENERGY STAR

Weight and Dimensions

Depth (with stand)	272.5 mm
Width (with stand)	813.8 mm
Height (with stand)	585.2 mm
Weight (with stand)	- g
Depth (without stand)	105 mm
Height (without stand)	389.2 mm
Weight (without stand)	11100 g