HP Z6 G4 User Manual

6 Updating the computer
HP is constantly working on improving your total computer experience. To ensure that the computer
leverages the latest enhancements, HP recommends that you install the latest BIOS, driver, and software
updates on a regular basis.
Updating the computer after rst boot
After successfully booting the computer for the rst time, follow these guidelines to be sure that the
computer is up-to-date:
●
Be sure that you have the latest system BIOS version loaded. See Updating the BIOS on page 29.
●
Be sure that you have the latest drivers for your system. See Upgrading device drivers on page 30.
●
Become familiar with your available HP resources.
●
Consider a subscription to Driver Alerts at https://h41369.www4.hp.com/alerts-signup.php.
Updating the BIOS
For optimum performance, determine the BIOS version on the computer, and upgrade it if necessary.
Determining the current BIOS version
To determine the current BIOS version:
1. Press Esc during startup (boot).
2. Press F10 to enter Computer Setup (F10).
3. Select Main, and then select System Information. Note the Computer System BIOS version.
NOTE: For procedures for upgrading the BIOS as well as the Computer Setup (F10) BIOS Menu settings,
see the Maintenance and Service Guide at http://www.hp.com/support.
Upgrading BIOS
To nd and download the latest available BIOS version, which includes the latest enhancements:
1. Go to https://support.hp.com/us-en/products/workstations-thin-clients/.
2. Select your product.
3. Select Software and Drivers.
4. Follow the instructions to locate the latest BIOS version available for the computer.
5. Compare the BIOS version on your computer to the BIOS versions on the website (see Determining the
current BIOS version on page 29). If the BIOS version on the website is the same as the version on your
system, no further action is required.
6. If the BIOS version on the website is a version later than the one on your system, download the
appropriate version for the computer. Follow the instructions in the release notes to complete the
installation.
Updating the computer after rst boot 29

HP Z6 G4 Specifications

General

Tcase	76 °C
Stepping	M0
Processor cache	16.5 MB
Processor cores	12
Processor model	4116
System bus rate	- GT/s
Processor socket	LGA 3647 (Socket P)
Processor threads	24
Processor codename	Skylake
Processor frequency	2.1 GHz
Processor cache type	L3
Processor lithography	14 nm
Processor manufacturer	Intel
PCI Express slots version	3.0
Processor boost frequency	3 GHz
Processor operating modes	64-bit
ECC supported by processor	Yes
Thermal Design Power (TDP)	85 W
Number of processors installed	1
Maximum number of PCI Express lanes	48
Memory types supported by processor	DDR4-SDRAM
Memory clock speeds supported by processor	2400 MHz
Maximum internal memory supported by processor	768 GB
On-board graphics card model	-
Memory slots	12x DIMM
Internal memory	16 GB
Memory channels	Hexa-channel
Memory clock speed	2666 MHz
Maximum internal memory	384 GB
Memory layout (slots x size)	2 x 8 GB
Wi-Fi	No
Ethernet LAN data rates	10, 100, 1000 Mbit/s
SSD capacity	The Solid State Drive's storage capacity in Gigabytes.
Storage media	SSD
Optical drive type	DVD Super Multi
Total storage capacity	512 GB
Power supply	1000 W
PS/2 ports quantity	2
USB 2.0 ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	10
Product color	Black
Country of origin	China
Product type	Workstation
Scalability	2S
Processor code	SR3HQ
Processor ARK ID	120481
Intel TSX-NI version	1.00
Processor package size	76.0 x 56.5 mm
Supported instruction sets	AVX, AVX 2.0, AVX-512, SSE4.2

Weight and Dimensions

Depth	465 mm
Width	169 mm
Height	445 mm
Weight	13100 g