EasyManuals Logo
Home>HP>Monitor>ZR30w

HP ZR30w User Manual

HP ZR30w
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Front Panel Controls
Table 4-1 Monitor Front Panel Controls
Control Function
1 Source Selects the video input (DisplayPort or DVI-D)
2 – (Minus) Reduces the brightness setting.
3 + (Plus) Increases the brightness setting.
NOTE: Pressing the + (Plus) and – (Minus) buttons at the same time enables or disables the Dynamic Contrast Ratio (DCR)
function. When enabling the DCR function, the power LED will flash four times. When disabling the DCR function, the power LED
will flash one time.
4
Power Turns the monitor on or off.
5 Power LED Sleep mode — amber
Continuous flashing blue — non-supported video mode
Three flashes of blue — upper or lower limit of brightness control
Four flashes of blue — DCR is enabled
One flash of blue — DCR is disabled
Steady blue — full power and monitor is displaying a supported mode (LED automatically turns off after
30 seconds)
NOTE: The monitor does not support an On-Screen Display (OSD) menu.
ENWW Front Panel Controls 17

Table of Contents

Other manuals for HP ZR30w

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ZR30w and is the answer not in the manual?

HP ZR30w Specifications

General IconGeneral
3DNo
Pixel pitch0.2505 x 0.2505 mm
Display surfaceMatt
Display diagonal30 \
Display resolution2560 x 1600 pixels
Viewable size diagonal762 mm
Contrast ratio (dynamic)3000:1
Contrast ratio (typical)1000:1
Display number of colors-
Display brightness (typical)370 cd/m²
Supported graphics resolutions2560 x 1600 (WQXGA)
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)10 - 80 %
Product colorBlack
Country of originChina
Market positioningBusiness
HDCPYes
USB hub version2.0
DVI-D ports quantity1
VGA (D-Sub) ports quantity0
USB Type-A downstream ports quantity5
LED indicatorsPower
Tilt angle range-5 - 35 °
Height adjustment100 mm
Panel mounting interface100 x 100 mm
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2 W
Power consumption (typical)185 W
Cables includedAC, DisplayPort, DVI, USB
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)276 mm
Height (with stand)489 mm
Depth (without stand)87 mm
Width (without stand)694 mm
Height (without stand)454 mm
Weight (without stand)13000 g

Related product manuals