41
7.2.1 Using the Configuration Tool
If the HG630b parameter settings were configured incorrectly, log in
to the web management page to reload the default configuration file
and restore the user to its default settings. Perform this operation with
caution. After the user is restored to its default settings, all custom
data and settings will be lost, and the password will be restored to
u s e r.
Step 1
Log in to the web management page.
Step 2
In the navigation tree, choose Maintenance > Device
Management.
Step 3
In Reset tab, click Restore Default Settings.
Step 4
In the displayed dialog box, click OK.
7.2.2 Using the Reset Button
If you forget the login password to the web management page or
could not access the web management page, use the Reset button on
the HG630b rear panel to restore the HG630b to its default settings.
Perform this operation with caution. After the HG630b is restored to
its default settings, all custom data and settings will be lost, and the
password will be restored to user.
Step 1
Press the HG630b power button to power the HG630b on.
Step 2
Press and hold the Reset button for 8 seconds to 10 seconds.
The HG630b will restart, which will cause temporary network
interruptions.
After the HG630b is restored to its default settings, change the
computer IP address so that it is in the same netwo
To Next Page
Loading...
Need help?
General
