Conditions for IP68 resistance level:
l S
tatic fresh water at a depth of 1.5 m
l Test duration: 30 minutes
l Temperature difference between the water and the device: no greater than 5°C
To prevent liquid damage, avoid the following:
l Exposing your device to pr
essurized or high velocity water. For example, carrying the device with
you when taking a shower, swimming, water skiing, or surng.
l Using the device in hot and humid conditions, such as in a sauna, spa, and bathroom.
l Exposing the device to liquids other than pure water. For example, seawater, pond water, salt water,
ionized water, beverages containing alcohol or sugar, cosmetic lotions, or detergents.
l Intentionally submerging the device or placing it in environments that may cause damage.
l Connecting the device to accessories or charging it when it is wet.
l Dropping your device or other impacts that may cause damage. Disassembling your device or
performing other destructive operations.
l Using the device when the card tray or slot is not properly inserted.
What should I do if my device gets wet?
l Avoid drying your device using external sources of heat (such as a hair dryer or microwave oven).
Avoid placing objects such as cotton swabs or tissue paper into the charging port or speaker holes.
l Immediately dry all surfaces of your device, and then place it in a well-ventilated and dry area. Place
your device in front of a fan. Let the fan blow cold air against the charging port and speaker holes.
This may dry your device faster.
l If your device has been immersed in water, or the microphone, receiver, or speaker is wet, the
sound may not be clear during calls. Dry your device by referring to the preceding operations.
l If your device comes into contact with any liquids, do not charge the device or connect it to any
accessories. Use a piece of soft, lint-free cloth (such as microber cloth) to wipe your device dry
befor
e using it. If you have further questions, bring your device and the proof of purchase to a
Huawei authorized service center for assistance.
l The device has an oil repelling coating that prevents ngerprint smudges but may wear out over
time. Cleaning and corrosive products may further reduce the effectiveness of this coating and
scratch the device.
l Despite the foregoing care tips, the device may still be susceptible to damage under certain
circumstances.
Laser safety information
l Laser class: CLASS 1. Compliance with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice. 50, dated June 24, 2007
l Wavelength: 940 nm
l Laser standard (International): IEC/EN 60825-1:2014
Legal Notice
113
To Next Page
Loading...
Need help?
General
Weight and Dimensions
