Huawei WS322 User Manual

WS322 300Mbps Wireless Range Extender
User Guide
4 Configuring WiFi Router Mode
4-9
4.2.2 Setting Up a Wireless Connection Using the WPS
Button
Push the WPS button once to quickly set up a wireless connection between the
WS322 and any WPS-capable device. Before you set up a wireless connection using
the WPS button, verify the following:
 The wireless network security mode of the WS322 is WPA2-PSK or
WPA-PSK/WPA2–PSK.
 The wireless device (laptop, tablet, or mobile phone) to connect to the WS322
is WPS-capable.
Step 1 Press the WPS button on the wireless device to start WPS negotiation.
For details, see the user guide for the wireless device.
Step 2 Within 2 minutes, press and hold the WPS button on the WS322 for 1
second or more. The WPS button indicator blinks.
When the WPS indicator on the WS322 is steady on, a connection between the
WS322 and wireless device is set up. The WPS indicator is on for 300 seconds. Then
the WPS indicator turns off.

Huawei WS322 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Rack mounting	No
Bandwidth (first)	2.4 GHz
Ethernet LAN (RJ-45) ports	1
DHCP client	-
Antennas quantity	2
Security algorithms	128-bit WEP, 64-bit WEP, TKIP, WEP, WPA-PSK, WPA2-PSK, WPS
Certification	CCC, CE, FCC, RoHS
AC input voltage	100 - 240 V
Power consumption (typical)	5 W
Storage temperature (T-T)	5 - 95 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	30.7 mm
Width	73 mm
Weight	200 g