EN
PROGRAMMING CONTINUED
Sensor Operation
The NODE is compatible with Hunter Clik-type rain sensors, including
Mini-Clik
®
, Freeze-Clik, and Wired Rain-Click
®
, as well as many other
interrupt-type devices/sensors that do not require power. Simply
connect the sensor to the NODE controller by cutting the yellow wire
loop and connecting to the sensor wires.
NOTE: NODE is not compatible with Hunter
Wireless Rain-Clik
®
or other weather devices that
require 24 VAC power.
When the sensor is activated, it will suspend irrigation and the icon
will show on the display.
11
To Next Page
Loading...
Need help?
General
