Hunter Universal Fan and Light Remote Control User Manual

44092-01 • 12/15/10 • Hunter Fan Company
6
3 • Receiver Installation
1. Use the 2 large (orange) wire connectors supplied to connect the receiver and
house wiring, then use the 3 small (blue) wire connectors supplied to connect
the receiver and ceiling fan wiring. Refer to the Wiring Diagram in Figure 6.
If you are installing the remote with a Hunter Fan, the wire colors in the fan
will be as follows:
Light Power = Black with a White Stripe
Fan Power = Black
Common = White
*These are only the Hunter fan wire colors. Other
brands may use different colors.
2. Be sure the antenna is positioned securely, so it does not interfere with the
ceiling fan motor. Do not modify or damage the antenna wire, as control
performance may be reduced. After securing the receiver, antenna, and
wiring, nish hanging the ceiling fan according to its instructions.
3. Restore power at main electrical panel.
*Hunter fan wire colors. Other brands may use different colors.
Antenna
AC
Power
In
Common
Fan
Light
Black/Hot (marked “LIVE
IN” on red label)
White/Neutral (marked
“NEUTRAL IN” on red
label)
Figure 6
Wiring Diagram
White (marked
“COMMON OUT” on
white label)
Black
(“FAN
OUT”)
Red
(“LIGHT
OUT”)
Black*
Black
&
White*
White*

Hunter Universal Fan and Light Remote Control Specifications

General

Brand	Hunter
Model	Universal Fan and Light Remote Control
Category	Remote Control
Language	English