HUROM HH series - Disassembling and Cleaning the Spinning Brush

3
DISASSEMBLING AND CLEANING THE SPINNING BRUSH
2
Detach the silicone brush from the
spinning brush.
With the cleaning brush, wash inside
and outside of spinning brush under
running water.
As shown in the figure, hold the outer part of silicone
brush and pull it out gently in the direction of the
arrow. Silicone brush may be torn or damaged if it is
pulled apart forcefully.
Clean the silicone brush in the same way under run-
ning water.
Remove the spinning brush from
strainer.
1
18 l
Silicone brush
Cleaning brush
Spinning brush
2 4PJ12235-HH series_V.01.indd 20 2013-06-07 오후 7:41:41