INSTALLATION
HOW TO SET UP YOUR
COMPRESSOR.
Location of the Air Compressor
Locate the air compressor in a clean, dry
and well ventilated area. The air
compressor should be located at least
12" away from the wall or other
obstructions that will restrict the flow of
air. The air compressor pump and
shroud are designed to allow for proper
cooling. The ventilation openings on the
compressor are necessary to maintain
proper operating temperature. Do not
place rags or other containers on or
near these openings.
GROUNDING INSTRUCTIONS
DANGER! Risk of Electric
Shock. In the event of a short circuit,
grounding reduces the risk
of shock by providing an
escape wire for the electric current.
This air compressor must be properly
grounded.
The portable air compressor is equipped
with a cord having a grounding wire with
an appropriate
grounding plug (see following
illustrations). The plug must be used with
an outlet that has been installed and
grounded in accordance with all local
codes and ordinances.
1. The cord set and plug with this
unit contains a grounding pin.
This plug MUST be used with a
grounded outlet.
IMPORTANT: The outlet being used must
be installed and grounded in accordance
with all local codes and ordinances.
2. Make sure the outlet being used
has the same configuration as
the grounded plug. DO NOT USE
AN ADAPTER. See illustration.
3. Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
4. If these grounding instructions are
not completely understood, or if in
doubt as to whether the
compressor is properly grounded,
have the installation checked by a
qualified electrician.
Risk of Electric Shock. IMPROPER
GROUNDING CAN RESULT IN
ELECTRICAL SHOCK.
Do not modify the plug provided. If it
does not fit the available outlet, a
correct outlet should be installed by a
qualified electrician. Repairs to the
cord set or plug MUST be made by a
qualified electrician.
To Next Page
Loading...
Need help?
General
