Need help?Do you have a question about the Husqvarna 142 and is the answer not in the manual?
Prepare for safe operation and restrict saw use to trained adults.
Guidelines for safe operation, including two-handed grip and proper work environment.
Ensure the saw is in good condition, with sharp chain and functional brake.
Precautions for safe handling and storage of fuel to prevent fire hazards.
Recognize kickback causes like tip contact and pinch, and how to avoid them.
Tips to minimize kickback, including chain sharpness, proper tension, and clear work areas.
Proper body positioning and grip to maintain control of the saw during operation.
Guide bar designed with a small radius tip to reduce kickback danger zone.
Chain with contoured depth gauge to deflect kickback force.
Reduces chance of hand contacting chain if grip is lost.
Ergonomic design for balance and resistance during kickback.
Details on the chain brake's operation and its role in preventing kickback injuries.
Explanation of CKA values and recommended bar/chain combinations for safety.
Warning about potential health effects from prolonged vibration exposure.
Information regarding the muffler and spark arresting screen components.
Step-by-step guide for installing the guide bar and saw chain.
Instructions for checking and adjusting chain tension for optimal performance.
Procedure for starting the engine when cold or after running out of fuel.
Procedure for starting the engine when it is already warm.
Troubleshooting steps for a flooded engine or difficult starting conditions.
Explanation of the chain brake's operation and safety warnings.
Planning and execution of safe tree felling, including retreat paths.
General tips for safe and effective cutting, including chain tension and throttle use.
Detailed steps for making notch cuts and felling large trees.
Description of cutting techniques like overcutting and undercutting.
Techniques for cutting logs without external support, avoiding pinching.
Methods for cutting logs supported by stands or other logs.
Safe procedures for removing branches from a felled tree.
Guidelines for safely pruning branches at or below shoulder height.
Recommended maintenance tasks and their frequencies for optimal performance.
Instructions for cleaning and maintaining the air filter for engine efficiency.
Information regarding the muffler and spark arresting screen components.
Procedures for adjusting the carburetor for optimal engine performance.
Specific steps to adjust the idle speed screw for correct engine idling.
Overview of owner's responsibilities and rights regarding emissions warranty.
Details on what parts are covered by the manufacturer's emissions warranty.
Owner's duties for maintenance and proper use to maintain warranty.
Explains that warranted parts will be repaired or replaced at no cost.
Owner will not be charged for diagnostic labor leading to warranted part determination.
Husqvarna may be liable for damages to other components caused by a warranted part failure.
Lists failures not covered, such as abuse, neglect, or improper maintenance.
Use of non-approved parts can void warranty claims.
Guidance on contacting Husqvarna for warranty claims.
Information on locating and contacting authorized service centers.
Use of approved parts for emission systems during warranty service.
Owner is responsible for performing all required maintenance as per manual.
To Next Page
General