English – 41
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise pressure
levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration levels under
various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
357XP 359
Engine
Cylinder displacement, cm
3
56,5 59,0
Cylinder bore, mm 46 47
Stroke, mm 34,0 34,0
Idle speed, rpm 2700 2700
Power, kW/ rpm (Europe) 3,2/9600 2,9/9000
Power, kW/ rpm (Australia) 3,2/9600 2,9/9000
Ignition system
Manufacturer of ignition system SEM SEM
Type of ignition system CD CD
Spark plug NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer of carburettor Walbro Walbro
Carburettor type HDA 190A/191A/199A HDA 190A/191A/199A
Fuel tank capacity, litre 0,68 0,68
Oil pump capacity at 9,000 rpm, ml/min 6-17 6-17
Oil tank capacity, litre 0,38 0,38
Type of oil pump Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, kg 5,5: 357 XP, 357 XP E-tech
5,6: 357 XPG, 357 XPG E-tech
5,5: 359, 359 E-tech
5,6: 359 G, 359 G E-tech
Noise emissions (see note 1)
Sound power level, measured dB(A) 113: 357 XP/G
111: 357 XP E-tech/G E-tech
113: 359 /G
111: 359 E-tech/G E-tech
Sound power level, guaranteed L
WA
dB(A) 114: 357 XP/G
112: 357 XP E-tech/G E-tech
114: 359 /G
112: 359 E-tech/G E-tech
Sound levels (see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)
(Europe)
101: 357 XP/G
100: 357 XP E-tech/G E-tech
101: 359 /G
100: 359 E-tech/G E-tech
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)
(Australia)
101: 357 XP/G
100: 357 XP E-tech/G E-tech
101: 359 /G
100: 359 E-tech/G E-tech
Vibration levels (see note 3)
Front handle, m/s
2
3,9 3,9
Rear handle, m/s
2
4,2 4,2
Chain/bar
Standard bar length, inch/cm 15”/38 15”/38
Recommended bar lengths, inch/cm 13-24"/33-61 13-24"/33-61
Usable cutting length, inch/cm 12-23"/31-58 12-23"/31-58
Chain speed at max. power, m/sec 21,4 20,0
Pitch, inch/mm 0,325/8,25 0,325/8,25
3/8" /9,52 3/8" /9,52
Thickness of drive links, inch/mm 0,058/1,5 0,058/1,5
Number of teeth on drive sprocket 7 7
To Next Page
Loading...
Need help?
General