Husqvarna 385XP User Manual

40 – English
TECHNICAL DATA
Bar and chain combinations
The following combinations are CE approved.
The combinations below are not CE type approved, but are recommended for 390XP/XPG on markets outside of Europe, which
do not demand special type approval.
Saw chain filing and file gauges
Bar Chain
Length, inch Pitch, inch Gauge, mm Max. nose radius Type
Length, drive links
(no.)
18 3/8 1,5 11T Husqvarna H42,
Husqvarna H48,
Husqvarna H81
68
20 3/8 1,5 11T 72
24 3/8 1,5 11T 84
28 3/8 1,5 11T 92
Bar Chain
Length, inch Pitch, inch
Max. number of teeth on tip sprocket /radius of tip
sprocket
Type
24 0,404 34 mm Husqvarna H64
28 0,404 34 mm
32 0,404 42 mm
36 0,404 42 mm

Husqvarna 385XP Specifications

General

Idle speed	2700 rpm
Maximum power speed	9600 rpm
Fuel tank volume	0.9 L
Oil tank volume	0.4 liters
Chain pitch	3/8 inch
Chain gauge	0.058 inch
Bar length	18-28 inches