EasyManuals Logo

Husqvarna AUTOMOWER 105 User Manual

Husqvarna AUTOMOWER 105
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
charging station to charge the battery. When the
battery is charged, the product moves out of the
charging station and stops. The product is now
prepared to start operation, but needs
confirmation from the operator first.
Note: If you want to cut the main area after the
battery is charged, set the product to
Auto
mode
before placing it in the charging station.
4.4 To stop the product
1. Push the STOP button on top of the product.
The product stops and the blade motor stops.
4.5 To switch off the product
1. Press the STOP button on top of the
product.
2. Set the Main switch to position
0
.
WARNING:
Always switch off the
product using the main switch if it
requires maintenance, or if the product
must be moved outside the work area.
4.6 Timer and Standby
The product has an inbuilt standby period
according to the Standby time table. The standby
period provides for instance a good opportunity to
water or play games on the lawn. The standby
time is depending on how much active time
(cutting and searching) the product has each day.
The active time is in turn depending on for
example battery capacity, slopes and grass
growth. When the product has operated the
allowed active period in a day, the message
Today's mowing complete is shown in the
display. The product is then in standby mode until
next day.
Model Standby time, minimum
hours per day
Automower
®
105 10
4.6.1 Example 1
This example is applicable to products with a
specified work area of 500 m
2
, but the principle is
the same for the other models.
Timer setting, Period 1: 07:00 - 23:00
Active period (A): 07:00 - 21:00
The timer setting ensures that the product begins
cutting the lawn at 07:00. However the product is
parked in standby mode in the charging station
from 21:00 and rests until it starts cutting again at
07:00.
24 h
A
B
Standby
Mowing
Charging
Opera
tion
Example: A specified work area of 500 m
2
Operation, A = max. hours 14
Charging/Standby, B = min. hours 10
4.6.2 Example 2
This example is applicable to products with a
specified work area of 500 m
2
, but the principle is
the same for the other models.
The timer settings can be divided into 2 work
periods to prevent mowing when there usually is
other activities ongoing. If the timer setting is
divided into 2 work periods, the minimum standby
period must in total be according to the Standby
time table. Refer to
Timer and Standby on page
29
.
1285 - 004 - 16.04.2020
Operation - 29

Other manuals for Husqvarna AUTOMOWER 105

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna AUTOMOWER 105 and is the answer not in the manual?

Husqvarna AUTOMOWER 105 Specifications

General IconGeneral
Cutting Width17 cm
Cutting Height20-50 mm
Area Capacity600 m²
Battery TypeLi-ion
Typical Charging Time50 min
Typical Mowing Time on One Charge70 min
Weight6.7 kg
Maximum Slope25 %
Battery Capacity2.1 Ah
Battery Voltage18 V
Weather ResistanceYes
Boundary Wire RequiredYes
Smart ConnectivityNo
Blade TypePivoting Razor Blades

Related product manuals