Husqvarna AUTOMOWER 430X User Manual

English - 74
MAINTENANCE
8 Maintenance
Check and clean the robotic lawnmower regularly and
replace worn parts if necessary to improve operating
reliability and to ensure a longer service life. For further
information on cleaning, see 8.4 Cleaning on page 76.
When the robotic lawnmower is rst used, the blade
disc and blades should be inspected once a week. If
the amount of wear during this period has been low, the
inspection interval can be increased.
It is important that the blade disc rotates easily. The
edges of the blades should not be damaged. The service
life of the blades varies immensely and depends for
instance on:
• Operating time and size of the working area.
• Type of grass.
• Type of soil.
• The presence of objects such as cones, windfalls,
toys, tools, stones, roots and the like.
The normal service life is 2 to 6 weeks when used in areas
more than 1,500 m
2
in size and longer for smaller areas.
To replace the blades, see 8.7 Blades on page 78.
IMPORTANT INFORMATION
Working with dull blades gives a poorer
mowing result. The grass is not cut clean-
ly and more energy is needed resulting in
the robotic lawnmower not mowing such a
large area.
1157866-26,420,430X,450X,EN_160314.indd 74 2016-03-14 16:59:58

Husqvarna AUTOMOWER 430X Specifications

General

Product Name	Husqvarna AUTOMOWER 430X
Category	Lawn Mower
Cutting Width	24 cm
Cutting Height Min	20 mm
Cutting Height Max	60 mm
Battery Type	Li-ion
Typical Charging Time	50 min
Maximum Incline Within the Working Area	45 %
Cutting System	3 pivoting razor blades
GPS-assisted Navigation	Yes
Lift Sensor	Yes
Tilt Sensor	Yes
Ultrasonic Sensor	No
Battery Voltage	18 V
Weight	13.2 kg
Connectivity	Bluetooth, Cellular
Weather Resistance	Yes
Warranty	2 years