Operation
Introduction
WARNING: Before you operate the
product, you must read and understand the
safety chapter.
Husqvarna Connect
Husqvarna Connect is a free app for your mobile device.
The Husqvarna Connect app gives extended functions
for your Husqvarna product:
• Extended product information.
• Information about, and help with, product parts and
servicing.
To start to use Husqvarna Connect
1. Download the Husqvarna Connect app on your
mobile device.
2. Register in the Husqvarna Connect app.
3. Follow the instruction steps in the Husqvarna
Connect app to connect and register the product.
Note: Husqvarna Connect app is not available for
download in all markets. Speak to your servicing
dealer for more information.
To set the product in operation position
1. Fold the handle rearward.
2. Move the lower knobs up in the direction of the
handle until they stop and you hear a click.
3. Fold the upper handle fully up.
4. Tighten the upper knobs fully.
WARNING:
Do not operate the product
unless the handle is fully folded up and set
in one of the applicable height positions.
Refer to
To adjust the handle height on page
9
.
To set the cutting height
1. Move the cutting height lever rearward to increase
the cutting height.
1692 - 003 - 15.12.2021
11
To Next Page
Loading...
Need help?
General
