To Next Page

To Previous Page

RS 8500 DIESEL SPECIFICATIONS

Model: 14UC 20UC 26UC 30UC

Item Number: 968980120 968980121 968980122 968980123

w/ No Clutch

Item Number: 968980117 968980118 968980119 N/A

w/ Bladeshaft Clutch

STANDARD SAW FEATURES

Blade Guard Capacity

in (mm): 14” (350) 20” (500) 26” (650) 30” (760)

Bladeshaft RPM: 2940 2190 2190 1600

Max. Depth Of Cut:

4.5” 7.5” 10.5” 12.5”

(114 mm) (191 mm) (268 mm) (317 mm)

Arbor Size: 1” (25.4mm) with drive pin

Blade Shaft: 1-3/4” (44.5 mm) diameter

Blade Shaft Bearings: Sealed bladeshaft with 4 maintenance free ball bearings.

Blade Shaft Rotation: Upcut

Blade Shaft Drive: Fourteen (14) Grooves: 3VX V-Belts

(Dual 3 Groove Right Side + Dual 4 Groove Left Side)

Blade Control: Electro-hydraulic pump raises and lowers blade; positive depth stop.

Quick-Lift blade raising and lowering button on the speed control lever.

Blade Coolant: Water; Dual multiple-jet water spray tubes; Water supply connector located at left rear

of saw.

Air Filtration: 4-stage - 2 seperation, 2 elements

Fuel Capacity - gal. (l): 20 (75.7)

Axles: Front 1-1/4” (31.8 mm) diameter

Rear Rear wheel drive system.

Wheels: Front 12” x 5” x 1-1/4” (304 x 127 x 31.8mm) roller bearings, solid polyurethane tires, pressure

  lubricationttingsprovided.

Rear 12” x 5” x 8” (304 x 127 x 203 mm); solid rubber tread; mounted and keyed on axle shaft.

Transmission: Hydrostatic Transmission, parking brake, single control handle for neutral and

forward/stop/reverse.

Speed Innitespeed0to220FPMforwardandreverse

Brake: ManuallyswitchON/OFF;Springapplied;Hydraulicpressurerelease;onrearwheel

Chassis: Heavy-Duty, rigid, box and channel section construction

Weight - lb. (kg)

Crated: 2200 (100)

Uncrated: 2050 (932)

Husqvarna RS 8500 D User Manual

Questions and Answers: