35
TECHNICAL DATA
ENGINE
Manufacturer Briggs & Stratton
Type Endurance 44S777
Power
18.1 kW @ 3600 RPM
1)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 13.25 liters
Cooling Air cooled
Air lter Standard
Alternator 12v
Starter Electric
TRANSMISSION
Transmission Hydrostatic transaxles
Steering control Dual levers, foam gripped
Speed forward 0-6.5 mph
Speed reverse 0-3.5 mph
Brakes Mechanical park brake
Front caster tires 0-10.5 km/h
Rear tires, turf pneumatic 0-5.6 km/h
Tire pressure 15 PSI / 103 kPa / 1 bar
FRAME
Cutting Width 117 cm
Cutting Height 3,8 - 10,2 cm
Uncut Circle 0
Number of Blades 2
Blade Length 57,8 cm
Anti-scalp roller 3 adjustable
Sprung Seat Standard
Hinged Arm Rests Optional
Service Meter Digital
Blade Engagement Warner Electromagnetic Clutch
Deck Construction Stamped
Productivity
9,712 m
2
/h
DIMENSIONS
Weight 263 kg
Base Machine Length 191 cm
Base Machine Height 102 cm
Base Machine Width 106 cm
Overall Width, Chute Up 122 cm
Overall Width, Chute Down 142 cm
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
To Next Page
Loading...
Need help?
General
