600643 02/06
7
This safety alert symbol is used to call attention to a message intended to
provide a reasonable degree of PERSONAL SAFETY for operators and
other persons during the normal operation and servicing of this equipment.
DANGER – denotes immediate hazards which WILL result in
severe personal injury or death.
WARNING - denotes a hazard or unsafe practice which COULD
result in severe personal injury or death.
This manual uses two other words to highlight information.
IMPORTANT calls attention to special mechanical information and
NOTE: emphasizes general information worthy of special attention.
All operators should read this manual, or be instructed about safe
operating and maintenance procedures. This is the owner’s responsibility.
This machine meets or exceeds the B-71.1-2003 specifications of the
American National Standards Institute, in effect at the time of
production. However, improper use or maintenance by the operator
or owner can result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay attention to the
safety alert ▲ symbol, which means DANGER or WARNING -
“personal safety instructions.” Failure to comply with the instructions
may result in personal injury or death.
Incorrect usage of this machine may result in severe injury.
Personnel operating and maintaining it should be trained in the proper
use and should read the manuals completely and thoroughly before
attempting to set-up, operate, adjust, or service this machine.
The Quick Reference Decals are designed to give the operator brief
information needed in the daily operation and service of the machine.
These decals are not intended to be used in place of this manual but instead
is to be used as an extension of this manual. These decals should not be
removed or obliterated. Replace these decals if they become unreadable.
It is the owner’s responsibility to make certain that the operator reads
and understands this manual and all decals before operating this machine.
It is also the owner’s responsibility to make certain that the operator is a
qualified and physically able individual, properly trained in the operation of
this equipment. Local regulations may restrict the age of the operator.
The owner should also ensure that the operator/mechanic know that they
are responsible for their own safety as well as the safety of other persons
within the vicinity. Remember, the operator is responsible for accidents or
hazards occurring to other people or their property.
SAFETY PRECAUTIONS
To Next Page
Loading...
Need help?
General
