605596CE 7-1 REV C
TECHNICAL SPECIFICATIONS
FasTrak
®
Guaranteed
Sound Power
Level Operator Ear * Engine RPM
** Vibration (Maximum
weighted acceleration
m/s2 - whole body) Machine Mass
Nominal
Engine Power Cutting Width
Model No. dBA dBA RPM
m/s
2
kg kW cm
933424CE 105 92.1 2800 (± 50) 0.71 378 17.2 120
933432CE 105 90.8 2800 (± 50) 0.49 391 17.2 137
934851CE 105 92.3 2800 (± 50) 0.45 383 15.4 122
Sound
Measurements
(dBA)
Sound Power per Hemisphere method (ISO 3744 - 1994 & 11094 - 1991)
* IMPORTANT: Never alter or tamper with the engine speed (RPM) settings.
** Whole Body
The RMS acceleration in m/s² is measured for 3 minutes on a representative machine. The acceleration value depends
upon the roughness of the ground, the speed at which the mower is operating and the operator driving habits. Measure-
ments were obtained through actual field data according to STD Procedure in ISO 2631-1-1997.
Hand/Arm These values were obtained through hand/arm measure per ISO 5349-1-2001.
Model No.
933424CE The RMS acceleration in m/s² measured in 24 seconds is less than 2.5 m/s².
933432CE The RMS acceleration in m/s² measured in 24 seconds is less than 2.5 m/s².
934851CE The RMS acceleration in m/s² measured in 24 seconds is less than 2.5 m/s².
Test was performed on a static (stationary) machine.
To Next Page
Loading...
Need help?
General
