REV D 6-2 114510
4. Fill fuel tank(s) with fresh fuel. Run machine at half
speed for 5 minutes, checking operation of the H-Bar
®
handle. Stop engine and check for oil leaks, loose
fittings and so forth.
5. Tighten any bolts that have loosened and make sure
all hair pins, cotter pins and clevis pins are in place.
6. Install all safety shields and review safety precautions
listed in this manual.
7. Check and inflate tires to 8–12 psi (55–83 KPa).
8. Refer to engine manual for more information.
At start of new season always check that fresh oil
has been added to machine. If oil is drained at
season’s end and not replaced, engine damage will
result.
WARNING
To Next Page
Loading...
Need help?
General
