4 Mounting
4.1 Ambient conditions
1. Be sure the inverter is installed out of the reach of children.
2. Mount the inverter in areas where it cannot be touched inadvertently.
3. Ensure good access to the inverter for installation and possible service.
4. To make sure that heat can dissipate, observe the following minimum clearance
to walls, other inverters, or objects:
C
5. The
ambient
temperature
should be
below 40°C
to ensure
optimal
operation.
6. Recommend to mount the inverter under the shaded site of the building or
mount an awning above the inverter.
7. Avoid exposing the inverter to direct sunlight, rain and snow to ensure optimal
operation and extend service life.
Direction Min. clearance
Upward 300 mm
Sides 200 mm
Downawrd 500 mm
Front 500 mm
To Next Page
Loading...
Need help?
General
