35
Safety system of your vehicle
Front seat adjustment
Forward and rearward
To move the seat forward or rearward:
1.Pull the seat slide adjustment lever up
and hold it.
2.Slide the seat to the position you
desire.
3.Release the lever and make sure the
seat is locked in place.
Adjust the seat before driving, and make
sure the seat is locked securely by trying
to move forward and rearward without
using the lever. If the seat moves, it is not
locked properly.
Seatback angle
To recline the seatback:
1.Lean forward slightly and lift up the
seatback recline lever.
2.Carefully lean back on the seat and
adjust the seatback of the seat to the
position you desire.
3.Release the lever and make sure the
seatback is locked in place. (The lever
MUST return to its original position for
the seatback to lock.)
Seat cushion height (for driver’s seat)
(if equipped)
To change the height of the seat cushion,
move the lever upwards or downwards.
• To lower the seat cushion, push down
the lever several times.
• To raise the seat cushion, pull up the
lever several times.
OBA033002
OBA033003
OBA033004
To Next Page
Loading...
Need help?
General
