Hyundai HYBC5080AV User Manual

Once the engine has started press the throttle lever and throttle safety together. This will
accelerate the machine to cutting speed. To lock the throttle press the throttle lock button.
To release the throttle lock lightly press the throttle lever.
4. STOPPING PROCEDURE
4.1. Before stopping the machine allow the engine to cool down for a few minutes, by allowing it
to run without throttle.
4.2. You MUST allow the cutting head to come to a full stop before carrying out any maintenance
on the machine.
To STOP the machine release the throttle lever and move the ignition switch to the OFF
position. If not already in OFF position move the choke to the OFF position.
Page 21

Hyundai HYBC5080AV Specifications

General

Brand	Hyundai
Model	HYBC5080AV
Category	Brush Cutter
Language	English