8. GENERAL MAINTENANCE
Before cleaning, inspecting or repairing your chainsaw, make sure the engine
has stopped and is cool.
Disconnect the spark plug to prevent accidental starting.
8.1. Follow the instructions to carry out regular maintenance, pre-operating procedures and daily
maintenance routines.
8.2. Improper maintenance may result in serious damage to the machine.
8.3. Maintenance after each use.
8.3.1. Air Filter.
8.3.1.1. Dust on the cleaner surface can be removed
by tapping a corner of the cleaner against a hard
surface.
8.3.1.2. To clean dirt in the meshes, split the cleaner
into halves and brush in petrol.
8.3.1.3. When using compressed air, blow from the
inside.
8.3.1.4. To assemble the cleaner halves, press the rim until it clicks.
8.3.2. Chain oil port.
Dismount the guide bar and check the chain oil port
(1) for clogging.
To Next Page
Loading...
Need help?
General
