Safety systems of your vehicle
105
WARNING
When you return the rear seatback
to its upright position after being
folded down:
Be careful not to damage the seat
belt webbing or buckle. Do not
allow the seat belt webbing or
buckle to get caught or pinched in
the rear seat. Ensure that the seat-
back is completely locked into its
upright position by pushing on the
top of the seatback. Otherwise, in
an accident or sudden stop, the
seat could fold down and allow
cargo to enter the passenger com-
partment, which could result in
serious injury or death.
4. Insert the rear lap/shoulder belt plate
into the holder on the side trim not to
interfere with the seatback when fold-
ing down.
5.Pull up the rear seatback folding
lever(s) and fold the rear seatback for-
ward and down firmly.
6. To use the rear seat, lift and push the
seatback backward. Push the seat-
back firmly until it clicks into place.
Make sure the seatback is locked in
place.
7. Return the rear seat belt to the proper
position.
OPA037045
OPA037050
Type B
Type A
OPA037046
OPA037051
Type B
Type A
To Next Page
Loading...
Need help?
General
