Specifications, Consumer information, Reporting safety defects
68
RECOMMENDED LUBRICANTS AND CAPACITIES
*
1
Refer to the recommended SAE viscosity numbers on the next page.
*
2
Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel econo-
my by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in
everyday driving, but in a year’s time, they can offer significant cost and energy savings.
*
3
If the API service SM engine oil is not available in your country, you are able to use API service SL.
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil *
1
*
2
(drain and refill)
Recommends
Gasoline
Engine
Lambda 3.3
6.02 US qt. (5.7 l)
API Service SM *
3
,
ILSAC GF-4 (or above),
ACEA A5 (or above)
Automatic transaxle fluid
Gasoline
Engine
Lambda 3.3
8.24 US qt. (7.8 l)
MICHANG ATF SP-IV, SK ATF SP-IV,
NOCA ATF SP-IV, HYUNDAI genuine ATF SP-IV
Coolant
Gasoline
Engine
Lambda 3.3
9.6 US qt. (9.1 l)
Mixture of antifreeze and distilled water
(Ethylene glycol base coolant for aluminum
radiator)
Brake fluid
0.74 ~ 0.85 US qt.
(0.7 ~ 0.8 l)
FMVSS116 DOT-3 or DOT-4
Rear differential oil (AWD)
0.56 US qt. (0.53 l)
HYPOID GEAR OIL API GL-5, SAE 75W/90
(SHELL SPIRAX X or equivalent)
Transfer case oil (AWD) Lambda 3.3
0.72 US qt. (0.68 l)
HYPOID GEAR OIL API GL-5, SAE 75W/90
(SHELL SPIRAX X or equivalent)
Fuel
18.95 US gal. (71 l)
Refer to “Fuel requirements” in section 1
To Next Page
Loading...
Need help?
General
