IBC VX 110 User Manual

1.
Attach the support bracket (supplied) to the
wall studs using the two ¼" x 2½" long lag
screws with flat washers.
2.
Hook the boiler tab (located on
back of boiler) over the support
bracket flange.
3.
Ensure that the boiler tab is flush against
the mounting bracket flange.
4.
Secure the lower part of the boiler
to the wall with two field-supplied
¼" bolts.
18
Section: Installation

IBC VX 110 Specifications

General

Brand	IBC
Model	VX 110
Category	Boiler
Language	English