IBM 3270 User Manual

Chapter 1. Turning on the 3270 PC
and Loading Your Control
Program
Before you can start using your 3270 PC, your
version of the 3270 PC Control Program must be
in its memory. Every time you turn on your
system, it loads a control program. What you
need to know is how to make the system load
your control program.
Before You Begin
Note: If you do not know how to operate your
3270 PC, look up the operating information
in the front
of the 3270 PC Guide to
Operations. binder, and read about:
• Turning the units on and off
• Inserting and removing diskettes
• Handling diskettes
• Using a fixed disk if.you have one.
Don't
turn anything on before you come
back here
and continue with these
instructions.
What You Will Need
First, you will need your version of the control
program. If you set it up yourself, you already
know where it is.
Chapter 1. Turning on PC/Loading Control Program 1-1

IBM 3270 Specifications

General

Brand	IBM
Model	3270
Category	Desktop
Language	English