IBM 3270 User Manual

Setting Up Specialized Sets of
Windows from Your Basic Set
You have a basic set of windows. This basic set
is called Screen Profile o. We call it screen 0 for
short. You probably have been using this set for
some time. If you want to check:
1. If your work station is not in Control Mode,
press the WSCtrl key.
This line should appear at the bottom of your
screen:
WSCTRL WINDOW=A SCREEN=O
The name for WINDOW will be the name of
the active window. The number for SCREEN
should be o.
2. Press the ChgSc key, this message should
appear:
INDWS040 Cannot use ChgSc: All other screens are empty
WSCTRL
WINDOW=A SCREEN=O
If you see that message, you only have screen
O.
You can rearrange the windows in screen 0, but
you still have to work with all of them. You
cannot add or remove windows from screen 0
without changing the way your control program
is set up. The arrangements that you can devise
for screen 0 may' not always fit your needs. You
9-34 Book 3 - Using the Control Program

IBM 3270 Specifications

General

Brand	IBM
Model	3270
Category	Desktop
Language	English