a. In the navigation area, select the managed system.
b. In the Tasks area, click Operations.
c. Click Change password. The Update Password window opens.
d. Type the required information and click OK.
If you are using an HMC Enhanced+ interface, complete the following steps:
a. In the navigation area, select the managed system and click the Users and Security icon, and then
select Users and Roles.
b. Click Change Password. The Update Password window opens.
c. Type the required information and click OK.
For more information about setting passwords for the managed system by using the HMC Classic or
HMC Enhanced interface, see Setting passwords for the managed system (http://www.ibm.com/
support/knowledgecenter/POWER8/p8hai/setpasswordsforthemanagedsystem.htm). For more
information about setting passwords for the managed system by using the HMC Enhanced interface,
see Setting passwords for the managed system (http://www.ibm.com/support/knowledgecenter/
POWER8/p8hai/p8hai_setpassword_enh.htm).
2. Update the time of day on the managed system by using the Advanced System Management Interface
(ASMI).
To access ASMI by using the HMC, choose one of the following navigation options depending on the
interface type of the HMC:
If you are using an HMC Classic or HMC Enhanced interface, complete the following steps:
a. In the navigation area, expand Systems Management > Servers.
b. In the contents area, select the managed system.
c. In the task area, expand Operations.
d. Click Launch Advanced System Management (ASM).
e. Log on to the ASMI by using the administrator user ID and password.
f. Select System Config > Time of Day.
g. Adjust the time of day.
h. Select Save Settings.
If you are using an HMC Enhanced+ interface, complete the following steps:
a. In the navigation area, click the Resources icon, and then select All Systems.
b. To view the actions for that server, select the server name of the required server.
c. In the navigation area, click System Actions > Operations > Launch Advanced System
Management (ASM).
d. Log on to the ASMI by using the administrator user ID and password.
e. Select System Config > Time of Day.
f. Adjust the time of day.
g. Select Save Settings.
3. Check the firmware level on the managed system.
Note: The following operation is not supported by using the HMC Enhanced+ interface. If you are
using the HMC Enhanced+ interface, log out of the HMC, and then log in to the HMC and select the
HMC Classic or HMC Enhanced interface option.
a. In the navigation area, click Updates.
b. In the contents area, select the required managed system.
c. Click Change Licensed Internal Code for the current release.
d. Select View system information and then click OK.
e. In the Specify LIC Repository window, select None - Display current values and then click OK.
Installing the IBM Power System S814 (8286-41A) 43
To Next Page
Loading...
Need help?
General