IBM A50 User Manual

Removing the cover
Important
Read “Important safety information” on page v and “Handling
static-sensitive devices” on page 29 before removing the cover.
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
from the drives, and turn off all attached devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer.
4. Remove the two screws at the rear of the left side cover and slide the cover to
the rear to remove.
34 User Guide

IBM A50 Specifications

General

Brand	IBM
Model	A50
Category	Desktop
Language	English