128
Pentium III Processor Module (for 2172)
The Pentium III Processor Module comes in one SECC2 package. SECC2
stands for Single Edge Cartridge CPU 2.
Removing the Pentium III CPU Modul
Follow these steps to remove the Pentium III CPU module from the slot.
NOTE:
Determine the type of processor you are installing and make sure the
jumpers are set correctly. Run the Setup Utility after correctly installing
a processor.
ATTENTION:
Processors are sensitive to static discharge.
•
Unlock the latches that secure the processor module.
•
Firmly hold the processor module and pull it out of the socket.
To Next Page
Loading...
Need help?
General