Table 94. High Performance Flash Enclosure Gen2 feature codes for models 980, 981, 982,
98B, 98E, and 98F
Feature
code Feature Description
1303 Gen2 I/O enclosure pair High Performance Flash Enclosure
Gen2 support for models 980, 981,
982, 98B, 98E, and 98F
Required to support feature codes
1600, 1601, and 1604
1601 Flash RAID controller pair High Performance Flash Enclosure
Gen2 support for models 980, 98B,
981, 98E
Requires feature code 1602
1602 High Performance Flash Enclosure
Gen2 pair
Requires feature code 1601 or 1604
1604 Flash RAID adapter pair High Performance Flash Enclosure
Gen2 support for models 982 and 98F
Requires feature code 1602
1610 400 GB 2.5-inch Flash Tier 0 drive set Flash drive set (16 drives)
1611 800 GB 2.5-inch Flash Tier 0 drive set Flash drive set (16 drives)
1612 1.6 TB 2.5-inch Flash Tier 0 drive set Flash drive set (16 drives)
1613 3.2 TB 2.5-inch Flash Tier 0 drive set Flash drive set (16 drives)
1623 3.8 TB 2.5-inch Flash Tier 1 drive set Flash drive set (16 drives)
No intermix with Flash Tier 0 or
Flash Tier 2 drive sets
1624 7.6 TB 2.5-inch Flash Tier 2 drive set Flash drive set (16 drives)
No intermix with Flash Tier 0 or
Flash Tier 1 drive sets
1699 High Performance Flash Enclosure
Gen2 filler set
Includes 16 fillers
zHyperLink
For storage systems with 12-core and higher processors, zHyperLink connections
with z Systems hosts provide low latency for random reads.
The z-synergy Services license is required for zHyperLink. I/O Priority Manager
must be disabled.
The following table lists feature codes for zHyperLink.
206 DS8880 Introduction and Planning Guide
To Next Page
Loading...
Need help?
General