Appendix D. Error Codes
Appendix D. Error Codes
The following tables list the POST error codes and beep error codes for the IntelliStation M Pro.
POST Error Codes
POST error messages appear when POST finds problems with the hardware during power-on or when a
change in the hardware configuration is found. POST error messages are 3-, 4-, 5-, 8-, or 12-character
alphanumeric messages. An
x
in an error message can represent any number.
Table 55 (Page 1 of 2). POST Error Codes
Code Description
101 Interrupt failure
102 Timer failure
106 System board failure
110 System board parity error 1 (system board parity latch set)
111 I/O parity error 2 (I/O channel check latch set)
114 External ROM checksum error
121 Hardware error
151 Real time clock failure
161 Bad CMOS Battery
162 CMOS RAM checksum/configuration error
163 Clock not updating
164 CMOS RAM memory size does not match
167 Clock not updating
175 System board error
176 System cover has been removed
186 System board or hardware security error
187 Administrator password and boot sequences have been cleared
201 Memory data error
202 Memory address line error 00-15
203 Memory address line error 16-23
301 Keyboard error
303 Keyboard to system board interface error
601 Diskette drive or controller error
602 Diskette IPL boot record not valid
604 Unsupported diskette drive installed
662 Diskette drive configuration error
762 Math coprocessor configuration error
11xx Serial port error (xx = serial port number)
1762 Hard disk configuration error
1780 Hard disk 0 failed
1781 Hard disk 1 failed
1782 Hard disk 2 failed
1783 Hard disk 3 failed
Appendix C. IRQ and DMA Channel Assignments 59
To Next Page
Loading...
Need help?
General
