IBM Enhanced Diagnostics
The IBM Enhanced Diagnostics program runs independently of the operating
system. You can use this program to test hardware components of your
computer. You can use this program when other methods are not available or
have not been successful in isolating a possible hardware problem.
You can run the IBM Enhanced Diagnostics program using the Product
Recovery program on your hard disk. Alternatively, you can create an IBM
Enhanced Diagnostics diskette from the Product Recovery program.
You can also download the latest version of the Enhanced Diagnostics program
from http://www.ibm.com/pc/support/ on the World Wide Web. Type your
machine type and model number into the Quick Path field to find the
downloadable files that are specific to your computer.
Running IBM Enhanced Diagnostics from the Product
Recovery program
Use the following steps to run diagnostics from the Product Recovery program:
Note: If the Product Recovery program on your computer hard disk is
damaged or not accessible, the IBM Enhanced Diagnostics can be run
from the Enhanced Diagnostics diskette.
1. Shut down your operating system, and turn off the computer.
2. When you turn on your computer, press and hold the F11 key until the
Product Recovery menu is displayed.
3. Depending on your operating system, you might be prompted to select a
system setting. If no prompt is displayed, go to the next step.
4. When the main menu is displayed, select System Utilities.
5. From the System Utilities menu, select Run Diagnostics. The IBM
Enhanced Diagnostics program starts. When you are finished running
diagnostics, you will be returned to the Product Recovery main menu.
6. Restart the computer.
Creating an IBM Enhanced Diagnostics diskette
Use the following steps to create an IBM Enhanced Diagnostics diskette from the
Product Recovery program:
1. Shut down your operating system, and turn off the computer.
2. When you turn on your computer, press and hold the F11 key until the
Product Recovery menu is displayed.
3. Depending on your operating system, you might be prompted to select a
system setting. If no prompt is displayed, go to the next step.
4. From the main menu, select System Utilities.
22 NetVista
™
: Quick Reference
To Next Page
Loading...
Need help?
General
